Thursday, October 8, 2009

Tiffany Peacock Stained Glass Panel Progress

I have one side soldered and now am using the whole bench to flip over the panel. It's nearly impossible to do otherwise and without reinforcement bars. Bars will be installed later once the back side is finished and I flip it back over.
Turning a large window this way is very easy to do and is quite safe. There is a lip at the bottom of the window held securely to the bench with 2 1/2" deck screws preventing the panel from sliding off. I also attached 2 support braces on either side of the bench to keep the whole process at a good angle to easily lift the glass off and turn it around.



I'll post more photos as I go along :)